Hello.
We have an CNC machine whose memory is limited to 90 kb.
How do we change the postprocessor in postbuilder, so that it automatically divides the NC program into 90 kb?
Hello.
We have an CNC machine whose memory is limited to 90 kb.
How do we change the postprocessor in postbuilder, so that it automatically divides the NC program into 90 kb?
Hi
There is special Custom Command "pb_cmd_tape_break.tcl". All you need to do is to import it.
Another method you can use to split operations is Divide. However, it can only divide an operation by time or distance, not by size.
NX 10.0.3