[japes]

Hi,

I have a Mach3 usb controller https://www.hobbytronics.co.za/p/979...ion-controller .

The last thing I need to complete my build is a torch height controller, do you guys have any recommendations that will work with my controller board?

Also, I am from South Africa, I cant find THC in my country. So from where can I import it?

[agelkom]

Hi,

I have a Mach3 usb controller https://www.hobbytronics.co.za/p/979...ion-controller .

The last thing I need to complete my build is a torch height controller, do you guys have any recommendations that will work with my controller board?

Also, I am from South Africa, I cant find THC in my country. So from where can I import it?

USB interface card has a delay for THC controlling.
You can use Cap04 with CapStp11 for Stand Alone THC.
http://www.agelkom.com.tr/stepper_motor_interface.htm

[coherent]

For a low cost one do a search for Proma Torch Height Controllers. They have a couple different models that may work. Also just do a Ebay search. There are a number of different models and types listed. Also CandCNC has a lot of positive comments from folks who have their THC setup.

[robertspark]

Some info here:

https://www.plasmaspider.com/viewtopic.php?f=55&t=27023

http://www.forum.cncdrive.com/viewtopic.php?f=16&t=1615&start=10

Worth a read to consider

[rodw]

You could consider contacting Marius at Blue Arc Cnc
He's in your country and is very knowledeable about plasma.

[2bobr]

USB interface card has a delay for THC controlling.
You can use Cap04 with CapStp11 for Stand Alone THC.
http://www.agelkom.com.tr/stepper_motor_interface.htm

Price THC lots of good things being said about it
Or proma as many people use it but get the SE not the 150