Re: Tool change table location V30
Yes you can create an advanced posting tab with a check box and input for the X Y Z location for the tool change. This would be done with a scripted post. It's not an in the box feature but it's something that can be added to your post with out that much work.....
I've attached a sample scripted post for you to review. This post was created for V24 and will show you some the files and format needed to create a scripted post with and adv posting tab. I also recommend you search the help files on this topic because the help system will have more information for you.
Al DePoalo
Partner Product Manager BobCAD CAM, Inc. 866-408-3226 X147