[neolinux]

Hello,

i have a problem with exported gcode from Fusion 360:

if i select Mach3mill as posprocessor the Z axis doesen't rise up before it starts to mill, so the endmill bit will crash in the object.
I use the provided USB Software and i don't know wich postprocessor i have to select.

Can anyone help me?

Thank You.

[carl1961]

When you run your simulator in 360 does is flash red , also in mach post scrip you may need to change some settings. When I get home I'll post my mach3 script settings

Hello,

i have a problem with exported gcode from Fusion 360:

if i select Mach3mill as posprocessor the Z axis doesen't rise up before it starts to mill, so the endmill bit will crash in the object.
I use the provided USB Software and i don't know wich postprocessor i have to select.

Can anyone help me?

Thank You.

Sent from my Nexus 6 using Tapatalk

[neolinux]

I found a solution:

i generate the gcode selecting the Mach3mill postprocessor, then i home all the axes, i rise the Z axis 1-2cm above the piece to mill and then i start milling.

Is there any modification to the postprocessor that i can make to rise the Z axis automatically? The thinyG postprocessor does that, but i use Mach3 or the provided Software.