[loinguyen]

Hi ...
I have a MAKINO MC86 machine and is currently out of battery data loss. reload the data it asks for USERNAM and PASSWORD of MAKINO. Who knows just help ... thank you very much....

[mythos77]

Hi,
try MSYS

[loinguyen]

Thank you very much!
I will try. USERNAME and PASSWORD always?

[mythos77]

Its working?

[freakycnc]

loinguyen,
This is MPC2 system. Needs special consideration:
MPC-2
ON MPC-2 SIDE SELECT SET-UP PARAMETER SCREEN
SELECT " LOCK RELEASE "
PRESS " A" SIX TIMES. TOP ROW OF LOCKS WILL TURN PURPLE.
PRESS " AUX " KEY TO BRING UP " MC PRM " SOFT KEY.
PRESS " MC PRM " SOFTKEY
PRESS " LOCK RELEASE " SOFTKEY WHEN PMC PRM SCREEN APPEARS
PRESS " MAC" INPUT " SYS " INPUT
PRESS " D " TO DISPLAY PRM. DEFINITION
AFTER CHANGING OR LOADING PRM. PRESS " DATA SET " SOFTKEY
PRESS " LOCK "

freakycnc

[loinguyen]

freakycnc,
thanks.

[ductrung]

loinguyen,
This is MPC2 system. Needs special consideration:
MPC-2
ON MPC-2 SIDE SELECT SET-UP PARAMETER SCREEN
SELECT " LOCK RELEASE "
PRESS " A" SIX TIMES. TOP ROW OF LOCKS WILL TURN PURPLE.
PRESS " AUX " KEY TO BRING UP " MC PRM " SOFT KEY.
PRESS " MC PRM " SOFTKEY
PRESS " LOCK RELEASE " SOFTKEY WHEN PMC PRM SCREEN APPEARS
PRESS " MAC" INPUT " SYS " INPUT
PRESS " D " TO DISPLAY PRM. DEFINITION
AFTER CHANGING OR LOADING PRM. PRESS " DATA SET " SOFTKEY
PRESS " LOCK "

freakycnc

Dear freakycnc,
Thank you so much,
My Makino FS15MA with MPC-2 had "RAM PARITY ERROR" , I have to do "Memory All Clear "
Thanks to your post ,I tried to do every thing in your post and I could re-setting nearly all M/C parameter but...
there are 3 EMPTY rows (rows page 05,06,07) in the SET UP PARAMETER screen (see attached image) so ...
I cannot open 3 those pages to input the remaining of parameters as in the datasheet
Are there password or any ways to display 3 rows?
freakycnc or who knows can help me how to display 3 more rows ?,please.
Thank you in advance.
ductrung