587,080 active members*
3,201 visitors online*
Register for free
Login
IndustryArena Forum > Hobby Projects > Hobby Discussion > CNC milling a sharp point in Cambam
Results 1 to 4 of 4

Hybrid View

  1. #1
    Join Date
    Nov 2012
    Posts
    1269

    Re: CNC milling a sharp point in Cambam

    You mean, making a vertical spike in a flat piece of stock? Here is one way to do it in CamBam:
    - Draw a small diameter circle (0.1mm or so).
    - Create an outside profile MOP.
    - In the MOP properties, set Side Profile Method to "Slope" and Side Profile Value to "30".
    Of course, you need to set Stock Surface, Target Depth and Depth Increment as well. The smaller the Depth Increment, the smoother your spike would be.

  2. #2
    Join Date
    Oct 2018
    Posts
    7

    Re: CNC milling a sharp point in Cambam

    Thank you Citizen I have done this and it works fine. The .1mm diameter is fine also as this still makes it a sharp point. I tried doing this in 3D but had some unsatisfactory results as I think 3D in Cambam loved curves but hates verticals!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •