I'm stuck between using RhinoCAM and SheetCAM... I'm not familiar with creating post processors unfortunately. Rhino has a post processor for my controller but I'm using a Donek D2 drag knife and I'm not sure how to get it to work on RhinoCAM.
So SheetCAM is my other option since it already has the drag knife tool already on the program. Unfortunately SheetCAM doesn't have a post processor for my machine. I'm running a 3 axis machine with 16 tool changer, Syntec 6MB controller and
i'm using just flat mill and round mill bits and a Donek drag knife cutting EVA foam. Thank you for your time!