Re: Re-Chucking on Tornos EvoDeco 20
hello, if i get it right, there is "thing" with your actual programing method and/or machine, that does not allow you to machine such long parts
have you tried to g-code it ?
unfortunately, i can't help you with a nice code example, because i don't have such a machine, but i will give you pseudocode : thus create a simle program, that will do this :
... spindle 1 clamp
... Z1 advance +50mm
... spindle 1 unclamp
... Z1 advance -50mm ( going back, like nothing happened )
now loop it this code, should keep on going, until bar gets short once this "basic" thing works, you may add cutting operations over it
if you know the codes for your machine, you should deliver that behaviour in a few minutes ... try talking with your local dealer / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg