Hi guys, I have a VMC 15XT (recently bought, bearly tested it) and I have this type of problem: I power up the machine, I go in the jog mode, where I can jog z and y axes, but x axis won't jog. On the control unit I have some kind of "2 seconds warning" - my control unit is on german, and on the read outs i have "25" on the x axis, 0 on the y, and -1 on the z axis (these are not positions, i guess those are some balancing values). Those values are about 20, 25 right after the power up, untill I hear some relays click, and at the same moment those values drop (except x value). I guess x motor brake won't release.

Am I right? What should I do?

Thanks in advance,

Dragan