Hi all, first of all let my introduce myself, I’m James. Own and run and joinery company in york (uk) making wooden windows, doors kitchens and offices.
Recently I decided to take the plunge and purchase a can. I knew it was going to be a strep learning curve, but I’ve fallen st the first hurdle and can’t even get the machine on!!i purchased 2001 Biesse rover 27. I chose it as it has the c-axis for locks and hinges. It came from a working local factory it was working and fully functioning right before my eyes before it was turn off and disconnected.

Skip to an week later. I’ve now got it installed and wired in. With the air in the machine turns on the cabinet fan runs the pod indicators illuminat, you can turn the vacuum pump on. But that’s it. The screen turns on but just repeats “boot record from floppy” this scrolls down indefinitely. The mouse intergral key board machine buttons and computer keyboard an mouse don’t work.
It’s like it has no software on it .
I have rung Biesse uk, they don’t get involved with machines over 10years old
I know it may require a engineer visit for an indipendant.
In the mean time I was just wondering if there’s somthing obvious I’m missing. And also if anyone knows of a service tech in the uk? M

Like I say deep end!!

Hope you can help a newbie thanks James