I happened to be filming for a friend who is considering a TM-1 and wanted to see rigid tap work the exact moment the spindle started to chirp. After the tool change it spun up to 3500 rpm and got real loud quickly and was e-stopped until the Selway Tech arrived to diagnose.
https://youtu.be/cIbDhxI7otU
- - - Updated - - -
North of SeattleOriginally Posted by airjet
Results 1 to 20 of 33
Threaded View
-
11-22-2018, 05:17 AM #21
Registered
- Join Date
- Sep 2007
- Posts
- 97
Re: Spindle failed after only 229 cutting hrs?
2008 Haas TM-1, 2009 TL-1
Reply With QuoteSimilar Threads
-
FAILED TO START
By hooked in forum DIY CNC Router Table MachinesReplies: 9Last Post: 08-26-2016, 12:35 PM -
Machine Check: Failed.....Executive Load: Failed
By NorthwestMike in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 09-09-2014, 03:11 AM -
Hitatchi Seiki ht 30g 2213 spindle speed 0 alarm and 2246 cutting spindle alarm
By nixwake2snow in forum CNC Machine Related ElectronicsReplies: 0Last Post: 05-07-2014, 05:24 PM -
Something's failed - but I can't work out what!!! :(
By sideways in forum Stepper Motors / DrivesReplies: 4Last Post: 11-29-2013, 03:06 PM -
Tried to buy a HF X2 yesterday. Failed!
By tooManyHobbies in forum Benchtop MachinesReplies: 8Last Post: 03-12-2008, 12:00 AM
Tags for this Thread
Posting Permissions
