510,043 active members
2,892 visitors online
Register for free
Login
IndustryArena Forum > MetalWorking Machines > HURCO > Hurco VMX24s/Control dead? Help please,please.
Page 2 of 2 12
Results 13 to 21 of 21
  1. #13
    Registered
    Join Date
    Jun 2008
    Posts
    1032

    Re: Hurco VMX24s/Control dead? Help please,please.

    If you have a QWERTY keyboard attached, keep tapping the Delete key as it boots. The keyboard can be plugged into the purple socketon the CPU or if the cable is connected, into the back of the console.

  2. #14
    Member
    Join Date
    Nov 2018
    Posts
    25

    Red face Got it to work

    Got it to work
    Many Thanks Bloke I owe you good.
    The HDD Settings were the correct ones. It booted up nicely.

    Here is a link to the machine doing the warm up.

    https://photos.app.goo.gl/EuQo6XWCQp2Zew617

  3. #15
    Member
    Join Date
    Nov 2018
    Posts
    25
    But now i got into a different problem.
    My previous WiFi connection to the machine via a WiFi router its not working.
    The ISA card gets recognized by the system.
    I can access the Network parameters function on the control
    Apparently there is connection. the card shows blinking leds. Can you interpret tihs blinking leads?
    I can connect to the router wifi , but cannot connect to the Machine.
    since i got home, i am wondering if there is also some function to activate the Ethernet card on CMOS.
    It was working perfectly before.

    Link to a video:

    https://photos.app.goo.gl/aRnfdJsCXD6AcqeM7

  4. #16
    Member
    Join Date
    Nov 2018
    Posts
    25
    Maybe my router its not working correctly? I notice that the power button is flashing.
    But i can connect to him correctly.
    Tommorow i will bring the laptop and see if i can connect to the machine.
    rgds

  5. #17
    Member
    Join Date
    Nov 2018
    Posts
    25

    Angry This is so frustrating

    Driving everyday 100km to accomplish nothing gets very depressing.

    Unfortunately i could not get the network to work. It was working before flawlessly.

    All equipment is on the same subnet/ip range and still cannot connect. Tried to connect with laptop and nothing.

    Could it lose something in the BIOS? Need to configure some RQ settings in the BIOS? Since HDD was not recognized before i wonder.

    Please someone help. It seems i am Clueless here.
    Attached Thumbnails Attached Thumbnails IMG_20181205_150208.jpg   IMG_20181205_150258.jpg   IMG_20181205_151102.jpg  

  6. #18
    Registered
    Join Date
    Jun 2008
    Posts
    1032

    Re: Hurco VMX24s/Control dead? Help please,please.

    Hi, I’ve been working away for a couple of days but I’ll be back in the office tomorrow. If you PM me an email address, I’ll send the complete BIOS settings for your machine tomorrow. There are some that relate to IRQs that may stop the network card being seen.

  7. #19
    Member
    Join Date
    Nov 2018
    Posts
    25
    Hello Bloke.
    I have pm you.
    If you did not received pls say so.
    rgds
    Valter

  8. #20
    Registered
    Join Date
    Jun 2008
    Posts
    1032

    Re: Hurco VMX24s/Control dead? Help please,please.

    Nothing yet...

  9. #21
    Member
    Join Date
    Nov 2018
    Posts
    25
    Humm..
    I have tried to request a add as a contact you.

  10. #22
    Registered
    Join Date
    Jun 2008
    Posts
    1032

    Re: Hurco VMX24s/Control dead? Help please,please.

    I have done the same but it says you are not allowing private messages.

  11. #23
    Registered
    Join Date
    Jun 2008
    Posts
    1032

    Re: Hurco VMX24s/Control dead? Help please,please.

    or send a PM to Roooster on the other site.

  12. #24
    Member
    Join Date
    Nov 2018
    Posts
    25
    Quote Originally Posted by bloke View Post
    or send a PM to Roooster on the other site.
    Email is the usarname with the @gmail.com

Page 2 of 2 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •