Dear friends i have problem with Weihong NK105
in 3d machining the Z axis after some steps comes up and some time in the X,Y do shift thank you in advance of your answer
Thread: problem with axis
Results 1 to 4 of 4
-
12-02-2018, 03:26 PM #1
- Join Date
- Nov 2018
- Posts
- 1
problem with axis
-
12-03-2018, 12:09 AM #2
Member
- Join Date
- Apr 2004
- Posts
- 5737
Re: problem with axis
You're losing steps. Try reducing your acceleration value by half and see if things improve.
-
12-03-2018, 01:47 AM #3
Registered
- Join Date
- Jul 2011
- Posts
- 477
Re: problem with axis
It is better to use AC servo motor and driver, which will be more accurate, the cost are not so big different.
Originally Posted by jafar45
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html
-
12-25-2018, 07:45 AM #4
Member
- Join Date
- Mar 2017
- Posts
- 73
Re: problem with axis
Hello, friend,
Is your machine working with stepper motor? We also met same problem before. Did this happen after the machine working for very long time?
If so, this is not the problem of the NK105.
Jinan UnionTech Machinery Co., Ltd.
Reply With QuoteSimilar Threads
-
Omni 1350 Linear ATC Indexing problem on z axis problem
By djcregan in forum Omni CNCReplies: 1Last Post: 11-24-2017, 03:56 AM -
Problem with VSD-E in DualDC drive mode, axis 1 works but not axis 2.. any ideas?
By bmquist in forum CNC Machine Related ElectronicsReplies: 3Last Post: 08-31-2014, 04:08 PM -
Z axis problem.
By hoops1888 in forum Mach Software (ArtSoft software)Replies: 2Last Post: 07-02-2013, 07:14 PM -
a problem with slaved A-axis moving properly relative to Y-axis
By zool in forum Mach Software (ArtSoft software)Replies: 34Last Post: 07-06-2011, 03:45 AM -
TC-22 z axis problem
By gmagnuson in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 03-14-2008, 03:36 PM
Tags for this Thread
Posting Permissions
