6061 Aluminun Bar
0.75" x 0.125" X 14"
Bar may be extruded with rounded corners on sides, or not, the side rounding is preferred, but not important.
Ends rounded at 0.045 radius on all 4 edges. No sharp edges on whole part.
I get a good finish on these using dish scrubbing pads, and would like a finish like that.
Tolerance 4 thou.
This is for a patent pending medical device. Very much like an Orthopedic. The final product is worn on the body presses against fabric, so I want to avoid damage from sharp corners.
Quantities to quote:
100
1000
5000