Working on a Femco BMC 110 R with Fanuc 18-M control. The actual spindle speed doesn't show up on the lower left corner of the display .
Battery failed so not sure if I missed a parameter when reinstalling ( no parameter backup ) Could some one point me in the right direction for the parameter number ? Or what I missed.
Thanks
Results 1 to 4 of 4
Threaded View
-
12-14-2018, 07:16 PM #1
Junior Member
- Join Date
- Dec 2018
- Posts
- 2
18- M no actual spindle speed displayed on screen
Reply With QuoteSimilar Threads
-
Alarm 24 displayed on spindle drive - not ready
By maxvic in forum FanucReplies: 8Last Post: 09-03-2015, 04:46 PM -
Okuma Howa ACT3 - Fanuc 6T Nothing is displayed on CRT screen
By jhoanrojas in forum FanucReplies: 3Last Post: 11-13-2013, 05:23 PM -
Actual rapid speed Mori NT 1000?
By Tolyatti in forum Mori Seiki lathesReplies: 4Last Post: 08-06-2013, 12:23 AM -
Spindle speed varies from the command to the actual
By diemech in forum Haas MillsReplies: 4Last Post: 08-11-2009, 10:31 AM -
Mazak T3 problem with rpm monitor on screen show over the actual spindle.
By CNCTECHNOLOGY in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 05-24-2009, 05:51 AM
Tags for this Thread
Posting Permissions
