[iruss265]

Hi all,
After a Christmas wash the Interact 4 seems to have stuffed up a 24v power supply (replaced) and now on power on , no hum on power (motor fan, servos)button and then i hit reference and i get GROSS POSITIONING ERROR Z C .
Any direction please , no back up here in ozz.
Update- found blown lower fuse on heidenhain board on the door. Just blows when replaced.

[iruss265]

Hi all,
After a Christmas wash the Interact 4 seems to have stuffed up a 24v power supply (replaced) and now on power on , no hum on power (motor fan, servos)button and then i hit reference and i get GROSS POSITIONING ERROR Z C .
Any direction please , no back up here in ozz.
Update- found blown lower fuse on heidenhain board on the door. Just blows when replaced.

For further reference, seems i got moisture in the cabinet again and stuffed up the platine plc board , again!

[gus]

the reason for he GPE is probably the machine is not enabled, so when you try to home it, nothing

get a wiring diagram and chase that fuse, probably the source

- - - Updated - - -

and stop washing your machine