Re: Small Part CNC Plasma Cutting Fixture
Update
I have added a couple small parts to the fixture to help with securing the stock.
Attachment 422486
These are probably some of the smallest parts I have made with my plasma cnc. I am very happy with the results.
Here is a little video of the process.
https://youtu.be/qrV5DekQHeM
These were cut with my Everlast 50s on a CNCCS machine with Harbor Freight 40Amp consumables. I cant wait to try cutting them out using my Hypertherm machine using finecut consumables.
I added the holding arms to my write-up (near the end) here:
https://www.kronosrobotics.com/cnccsplasmafixture
Author of: The KRMx01 CNC Books, The KRMx02 CNC Books, The KRmc01 CNC Milling Machine Books, and Building the HANS Electric Gear Clock. All available at www.kronosrobotics.com