Hi all ,
I am using Kflop Board , in that board i am connecting pin IO 0 AND IO 6 to my limit switch for y axis. IO0 for positive and IO1 for negative.
When i am trying to move y axis from 0 to positive it detects the limit switch and stops the axis.
similarly from 0 to negative direction it is detecting and stopping the axis. That it is supposed to do.
But when i am trying to move from +10 to 0 it only detects when it reached 0 whether it detects limit or not it reaches to 0 and stops.
Similarly if am moving y axis from -10 to 0 it only detects when it reaches 0 before that whether it detects limit or not it reaches to 0 and stops and detects limit at 0.
It only happening in y axis as axis channel generator 1, all other axis and their limits are working fine.
Please solve my issue.
Waiting for your kind reply