502,307 active members
5,757 visitors online
Register for free
Login
Page 1 of 2 12
Results 1 to 12 of 24
  1. #1
    Registered
    Join Date
    Jan 2007
    Posts
    14

    Help on cnc convert for a smithy 1324

    Hi,
    My name is Tim. My dad has a Smithy 1324 3 in1 machine. We've been having a hard time to find products to make it CNC. We enjoy manual work, but like to get to CNC. Where look for everything to setup. Plus if their's stepper motors that wiil allow use to couple the hand cranks for manual use from time to time.


    Also looking for a simple digital readout that will work with a smithy. I know this stuff cost a lot. But my friends around won't help me out. We Just do this for hobbies, Rc Scale Gliders, and parts.


    Tim

  2. #2
    Registered
    Join Date
    Jan 2007
    Posts
    3
    Tim-

    I have had a Smithy 1324 since Feb. 1999. I have not converted it to CNC, but I did add a three axis DRO system a few years ago. The system I chose was the CBX Digital Display (from Shooting Star Technology). It has really made my machine so much more fun to use and has greatly increased my accuracy and repeatability. This is the same system that Smithy offers (or used to offer) in their catalog, but I went through Shooting Star directly. Smithy was able to provide me with how they recommend installing the DRO.

    The system I have has been replaced with a newer display with more functions.

    I am not selling mine, but thought I would let you know of one that works well with a Smithy.

    If your interested in discussing further, e-mail me at mmckim@houston.rr.com.

    Hope this helps,

    Mark

  3. #3
    Registered
    Join Date
    Jan 2007
    Posts
    14
    Thanks to MNM for the help. But I see that other people read these post. I would like to hear your side for help Please.


    Tim

  4. #4
    Registered
    Join Date
    Jan 2007
    Posts
    14

    Lightbulb

    Here's the machine I use in my Dad's Garage. Still looking at options for upgrading to CNC.


    Tim
    Attached Thumbnails Attached Thumbnails PICT0066.JPG   PICT0067.JPG  

  5. #5
    Registered
    Join Date
    Jan 2007
    Posts
    41

    Smithy Cnc

    Tim,
    If your interested I have a 1340 that I converted to cnc and ballscrews.
    I am converting it back to sell it.I have had to go to larger machines.
    I will sell the complete setup including the ballsrews and cnc setup plus the computer with MACH 3 ready to put on your machine.You will have to shorten the x axis ball screw but I believe everything else is the same.
    I also have the rotary table with a stepper motor that runs off the cnc setup.
    It is home built and uses gecko drives,check out Smithys' cataloge my machine was featured in there.
    It all works very well,I can send you photos of a cnc router that I cut alot of parts my Mastercam on my Smithy.
    If you live near Ohio you can come and try it out.

  6. #6
    Registered
    Join Date
    Jan 2007
    Posts
    14
    I'm interested if only the steeper motors have a double end. So I can do manual or cnc. unfortunitly i'm in california.

    Tim

  7. #7
    Registered
    Join Date
    Jan 2007
    Posts
    41

    Cnc

    No the motors aren,t double ends.
    With Mach 3 you can mill without making a program,you just don,t have to crank by hand.

  8. #8
    Registered
    Join Date
    Jan 2007
    Posts
    14
    Hey TPMX,

    It's still My dad's machine, he's looking for the double ends on the stepper motors.

    Sorry

    Tim

  9. #9
    Registered
    Join Date
    Jan 2007
    Posts
    5

    CNC retrofiting a 3in1

    TPMX,

    I am currently looking at a Busy Bee 2229, wich I believe it's very similar to the Smith 1324.(shorter)
    The B229 is shown here:
    http://busybeetools.ca/cgi-bin/pictu...5&NTITEM=B2229

    I am interesed in a CNC retrofit kit for it.
    Sounds like your set up might do the job.

    If it's still for sale, drop me a pm, or email me at mikedolson@kos.net

    regards

    Mike D


    QUOTE=TPMX;249209]Tim,
    If your interested I have a 1340 that I converted to cnc and ballscrews.
    I am converting it back to sell it.I have had to go to larger machines.
    I will sell the complete setup including the ballsrews and cnc setup plus the computer with MACH 3 ready to put on your machine.You will have to shorten the x axis ball screw but I believe everything else is the same.
    I also have the rotary table with a stepper motor that runs off the cnc setup.
    It is home built and uses gecko drives,check out Smithys' cataloge my machine was featured in there.
    It all works very well,I can send you photos of a cnc router that I cut alot of parts my Mastercam on my Smithy.
    If you live near Ohio you can come and try it out.[/QUOTE]

  10. #10
    Registered
    Join Date
    Jan 2007
    Posts
    14

    Smile

    Actully looking for the cnc with the double ended motors so we can mount hte hand cranks on it.


    Tim

  11. #11
    Registered
    Join Date
    Jan 2007
    Posts
    14
    Guys
    I've look around and cant find any thing on cnc for a smithy machine. Besides smithy products, which I'm not comfortable with astepper motor and a belt pully drive. I like to find where it's direct drive double end stepper motor setup. That can do a 3 in 1. their should a program that could split up operations with a 3 in1.


    Tim

  12. #12
    Registered
    Join Date
    Jun 2004
    Posts
    1
    Have you tried FlashCut CNC The Smithy Granite 1324 is built for a CNC upgrade made by these people.

    See http://www.flashcutcnc.com/html/retrofits.html

Page 1 of 2 12

Similar Threads

  1. Smithy 3 in 1 ?
    By fyffe555 in forum Smithy
    Replies: 9
    Last Post: 12-29-2007, 03:26 PM
  2. My new Smithy
    By z28dude38058 in forum Smithy
    Replies: 7
    Last Post: 11-09-2006, 01:02 AM
  3. I just found this site.... Granite 1324 owner
    By 89Wagoneer in forum Smithy
    Replies: 3
    Last Post: 06-10-2006, 02:39 PM
  4. Smithy to a CNC?
    By ishamon in forum Linear and Rotary Motion
    Replies: 1
    Last Post: 11-24-2005, 05:08 AM
  5. Replies: 3
    Last Post: 05-31-2005, 04:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •