Hi Gang!
So, I'm trying to wire up this Nema 34 Closed Loop Stepper (86J18156EC-1000-LS-14-HBL) to a 2HSS86H controller. I've read the short PDF. (see photo) The Driver shows AC 24c to 75v or DC 30V to 110v.
I have a 70v 400 watt switching PSU.
The problem is it is labeled as AC1 and AC2. I'm assuming since I could feed this AC, there is a bridge rectifier inside. Nowhere does it specify which connector I should use for DC + and -. I don't want to let out the blue smoke.
Also, I've never used a closed loop. there are 6 wires I guess for the encoder. Any tips.
I just need to test if everything actually works.
Thanks
Randy