My 4020 has a 21 tool changer on it, but my tool table allows 99 tools.
What if I have a job that uses a group of tools 28-35, can I assign any number to the tc slot such as saying this is slot 28 and let it increment from there?
My other machine lets me assign any tool in any slot, and it remembers it, but I have a feeling the Fadal is sequential only, which is still okay if it allows you to set the slot number besides 1.
Next, what if I want my 3D taster to be a non mounted tool, and I call it tool 99.
Can I do that and just use MDI for setting the G43 H99 ? I don't want to use up a usable 1-21 tool number for it.