I'm looking at 5/16-18 UNC 3B holes. Material = 625 Inconel overlay.
Is this feasible to thread mill? Any recommendations?
Results 1 to 1 of 1
-
01-22-2019, 08:56 PM #1
Registered
- Join Date
- Apr 2010
- Posts
- 2
Looking for advice on Thread milling small holes
Reply With QuoteSimilar Threads
-
Thread Milling rules of Thumb
By Dunny in forum MetalWork DiscussionReplies: 3Last Post: 02-09-2019, 01:34 AM
Tags for this Thread
Posting Permissions
