Hi All,
We are high school robotics team who got a donation of an old OKK MVC (32 tools) with Fanuc 6mb.
It looks as it is in working condition and we were able to start few manual runs and simple programs with it.
I have few questions:
1. In the tool file display we could see only 4 tools defined, the 5th and above has only *** in it. we were unable to configure any fields to enable this additional tool (we were in MDI and were able to modified the other tools 1-4)
2. What is the proper procedure to insert a tool into the machine and ensure it is at known location
3. We have entered a sample program and used T01M06, according to the old manual, when we observed the tool list used, it should have detected that we used T01 and display it with its offset etc., However the list is empty
4. When entering a new program, according to the user manual, when pressing the menu there should be kinds of wizards to set various actions. However, although there are options to select, they are all empty without any ability to proceed beyond the initial selection.

Any help will be appreciated to put us on the right track

Yoram