Hi I have fitted a switch to my z axis for a floating switch, it is set in inputs as 1 pin13 and when I trip the switch manually it lights up In diagnostics as m3 home but when I move the z axis the switch does not stop it .
Hi I have fitted a switch to my z axis for a floating switch, it is set in inputs as 1 pin13 and when I trip the switch manually it lights up In diagnostics as m3 home but when I move the z axis the switch does not stop it .
If you are setting this switch as "probe"....the switch stop Z axis only with command G31. Testing G31 Z-200 F300 and Z axis will stop when lights up.