Hi Mark,

Say running the GCode with your TP settings I'm getting different times.

With Facet Angle 0.5 degrees - 66 Seconds
With Facet Angle 5.0 degrees - 42 Seconds

I can understand my 0.5 degrees being faster than your 2 minutes as my PC and USB might be faster.

But I don't understand the 5 degrees being slower than your 30 seconds. If no PC or USB limitation our times should be the same.

There are some extra rapid moves at the beginning and end. Are you including those in your measurements?

Also please post your Init file so I have the exact same Rapid speeds.