[corydoras]

I am rebuilding my DIY cnc, and are going to use som sanyo denki servos, but the specs for the motors are not presented i oz, and since this is the value that i am used to with my earlier steppers, I hope someone could make the conversion for me from KG-CM to OZ pr inch

The specs are as follows:

Maximum continious torque Tc: 30 kg-cm

High speed continious torque Tcn: 24 kg-cm

Maximum stall torque Tps: 90 kg-cm

Torque constant Kt: 8.2

Thanx in advance

Cory

[Al_The_Man]

There is many torque etc conversion tables to pick from http://www.pitt.edu/~rsup/touqueconv.html
Al.

[corydoras]

Thax Al

I tried this, and got the result in Inch-pounds..., could this be converted into ioz-inch?

Sorry about the nag, but I live in the metric part of the world, and are not used to oz, pounds and so on

Cory

[Al_The_Man]

Lb-Inch to oz-inch multiply by 16.
Al.