505,911 active members
3,575 visitors online
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > Port programming on a 4th axis in 2017 edition
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Feb 2019
    Posts
    1

    Port programming on a 4th axis in 2017 edition

    Hi guys.

    I am having trouble to get my port programming to work with just a 4th axis.

    We have a Haas vf2 with an a axis and i want to use a lollipop mill to go down in to the port of a intake manifold to a car and mill inside but i cant get it to work properly.

    Is there any one that has some good knowledge in the matter that could help me out how to get it to work.

    Kind regards.

  2. #2
    Member
    Join Date
    Jan 2019
    Posts
    74
    Did you specify output to 4 axis?

  3. #3
    Community Moderator cadcam's Avatar
    Join Date
    Apr 2003
    Posts
    3521

    Re: Port programming on a 4th axis in 2017 edition

    What path are you using do you have Multiaxis options. what version?
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •