hello, i purchased a used cnc router. then i realized it was 3 phase. i have regular 220. what's my cheapest solution? attached are the specs on the converter and spindle. thank you so much?
Results 1 to 5 of 5
-
02-10-2019, 09:34 AM #1
Junior Member
- Join Date
- Jun 2009
- Posts
- 7
what size or solution for 3 phase ?
-
02-10-2019, 04:17 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
Re: what size or solution for 3 phase ?
Depends what section/devices are 3ph, it may be possible to use the vast majority of the M/C on 1ph.
What voltage 3ph is required?
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
02-11-2019, 06:27 AM #3
Junior Member
- Join Date
- Jun 2009
- Posts
- 7
Re: what size or solution for 3 phase ?
220 3 phase
-
02-11-2019, 07:26 AM #4
- Join Date
- Feb 2019
- Posts
- 4
220 VAC 3PH
Originally Posted by AAASIGN
-
02-11-2019, 04:26 PM #5
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
Re: what size or solution for 3 phase ?
So if you have 220 1ph available, check to see what exactly requires 3 phase to run, most could be actually 1ph and just the spindle or any other aux motors could be 3ph.
If so you could obtain a VFD for the spindle.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Posting Permissions
