How To Set Parameters In The Rack-driven Woodworking CNC Router Controlled By DSP A11 System,if you have any question?please contact me?
https://www.youtube.com/watch?v=h1L1...&index=10&t=0s
https://www.youtube.com/watch?v=pQ1T...&index=11&t=0s
How To Set Parameters In The Rack-driven Woodworking CNC Router Controlled By DSP A11 System,if you have any question?please contact me?
https://www.youtube.com/watch?v=h1L1...&index=10&t=0s
https://www.youtube.com/watch?v=pQ1T...&index=11&t=0s
E-mail: [email protected] Web: www.elephant-cnc.com
--------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------
Thank you, this is very useful to me. However, I still have some questions. I sent you an email and I look forward to your reply!
Could you please post Q and A here?
(If it's not private or confidential of course!)
Thanks :-)
hello ,if you have any question ,please contact me ,our mail: [email protected]
To be first brand CNC Manufacturer & Wholesaler platform.
--------Jinan Blue Elephant CNC Machinery Co., Ltd--------
This is our website?there are a lot of instructional videos on it, if you are interested, please look at it.
https://www.china-cnczone.com/catego...ol-system/dsp/
To be first brand CNC Manufacturer & Wholesaler platform.
--------Jinan Blue Elephant CNC Machinery Co., Ltd--------
How To Upgrade DSP A11 Control System
E-mail: [email protected] Web: www.elephant-cnc.com
--------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------
How To Work In DSP A11 Handle Control System
E-mail: [email protected] Web: www.elephant-cnc.com
--------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------
Display The Function Of High/Low Speed Mode In DSP A11 Control System
E-mail: [email protected] Web: www.elephant-cnc.com
--------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------
Do you have a setup guide for setting spindle speed control?
Are you a DSP A11 system, if so, please see:
Attachment 414014
On/off button and z+ button are increasing speed
On/off button and z-button are speed reduction
E-mail: [email protected] Web: www.elephant-cnc.com
--------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------
Hi,
Thanks for the reply. What you are showing in the picture is how to control spindle speed manually from the hand control.
This works in two ways:
1. When the machine is not running G-Code:
1a. Holding the two-button sequence of "On-Off" and the "Z+" or "Z-" button to increase or decrease spindle speed
2. When the machine is running G-Code:
2a. Pressing the "Z+" or "Z-" button to increase or decrease spindle speed dynamically
What I am asking is how to set up the A11 so that it responds to the spindle speed using the "S rpm_value" word embedded within a G-Code program.
Thanks :-)
No way.
A11 has dedicated digital outputs that interfaces with VFD in which are programmed different speeds that correspond to A11 outputs.
No PWM or 0-10V output from A11 (or any of that kind of CNC controllers with Ti DSP inside, made by Richnc - or knockoffs).
Make no mistake between my personality and my attitude.
My personality is who I am. My attitude depends on who you are.
Yes, understand the A11 controls spindle speed using a set of binary numbers. (1-8)
Example spindle speeds:
0
6000
9000
12000
16000
20000
22000
24000
(or similar depending on the spindle/drive combination)
The above corresponds to the spindle speed steps obtained via the DSP speed numbers 1 through 8. I have my A11 selecting the nearest RPM corresponding to the speed value (1-8) according to the above but am wondering if there is a better way to do it.
Example, If I select S1 spindle stays stopped. S2000 or S5000 would select 6000 RPM (closest to 6000 and slowest RPM I have), S8000 or S10000 would be 9000 RPM, S16000 is 16000 RPM etc.
The A11 shows the selected speed using the values 1-8.
Ask Richnc to rewrite the code for dsp
As I wrote, there is no other way to select spindle speed.
Make no mistake between my personality and my attitude.
My personality is who I am. My attitude depends on who you are.
Hello, friend, you can refer to this video
https://vk.com/elephantcnc?z=video40...wall_409164950
E-mail: [email protected] Web: www.elephant-cnc.com
--------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------
How To Use Tool Sensor In DSP A11 Handle Control System
To be first brand CNC Manufacturer & Wholesaler platform.
--------Jinan Blue Elephant CNC Machinery Co., Ltd--------
How To Input File In DSP A11 Handle Control System
E-mail: [email protected] Web: www.elephant-cnc.com
--------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------
How To Back To "Home" In DSP A11 Handle Control System
E-mail: [email protected] Web: www.elephant-cnc.com
--------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------
How To Continue To Work After Set The Breakpoint In DSP A11 Handle Control System
E-mail: [email protected] Web: www.elephant-cnc.com
--------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------
Display The Function Of Step Mode And Distance Mode In DSP A11 Contol System
E-mail: [email protected] Web: www.elephant-cnc.com
--------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------