[JB61]

Hi

I have a biesse rover b4.35 from 2004. I got this machin a boat 4 years ago and al this years I having this problem coming and going.
It stops when the dustcap is going down ore up. Then I got the error 1.2.10 and "halt! problem in external unit" (this error text translate from Norwegian).

I tried some things but don't help so now I need ask for help.

Jan

[Bsetek2010]

Hi Jan,

The issue with the dust hood is most likely the sensors on the cylinder that moves the hood up and down. It is very common for the hood to get stuck and not activate the sensors. The other error is a communication error with one of the devices on the machine. This can often be caused by bad connections on the modules, faulty cables, or un-grounded extraction hoses on the machine creating a static charge.

Hi

I have a biesse rover b4.35 from 2004. I got this machin a boat 4 years ago and al this years I having this problem coming and going.
It stops when the dustcap is going down ore up. Then I got the error 1.2.10 and "halt! problem in external unit" (this error text translate from Norwegian).

I tried some things but don't help so now I need ask for help.

Jan