Hi Fadal Owners,
My VMC 40 does not have a wiper for the Y axis way cover. This leads to chips falling on the lower cover, building up and falling on the ways. I am considering putting a way cover wiper across the Y-axis way cover just like the X-axis covers. Has anyone else done this or am I overthinking it? When I pulled the Y-axis cover off this past weekend, there were an ample number of chips sitting under there. The center box way was a bit rusty on top but the sides were good. It looks like that center way doesn't bear a load on the top and is just for alignment of the saddle so the rust probably isn't a big deal. What do you guys think?