Re: Morbidelli Z interpolation with R !!! H E L P !!!
Originally Posted by
jasmin_morbidelli
Thanks for answer,
are you ever work on Morbidelli?
Becouse there dont exist G code G17 G18 G19 only changing work face like F1 F2 F3 F4 up down left or right side of wood.
But if i change plane that show error like "THIS TOOL NOT FOR THIS PLANE" etc.
Becouse Morbidelli have horizontal and vertical tool. I need mail spindle tool in vertical position.
So, maybe its all about good post i dont know i use ALPHACAM and some post for Morbidelli but not my AUTHOR 600KL
Any idea?
Hi,
for 3D surface programming is ussualy used linearized code. So it is not created from circular interpolation but from G1 code (xl2p in xilog command) by a tolerance which you set in CAM. About your issue, do not know what you programme. But for example Helix can look like this.
XG0 X=117.658 Y=181.114 Z=-18 V=3000 S=6000 D=20 T=255 C=0 E=1
XAR2 X=174.751 Y=82.249 r=65.918 Z=-17 G=2
XAR2 X=60.565 Y=82.249 r=65.918 Z=-16 G=2
XAR2 X=117.658 Y=181.114 r=65.918 Z=-15 G=2
XAR2 X=174.751 Y=82.249 r=65.918 Z=-14 G=2
...
...
...
...
Alphacam post and VBA macros, Autodesk HSM post.
www.cadcam-softcz.cz