[tankdoctor]

Hi there.

This is tankdoctor, the noob in this forum.

Anyway, to get to the point, I have a significant problem in conversion.

I got lasma 443 cnc machine about 1 moth ago.

It has 3 SIEMENS AC servo motor, and TNC 410 M PLC controller to control the motion.

After I connect the line and put the power on, It doesn't moved.

Check the parameter and checking again, finally I got the main problem : The program in the PLC 410 M is gone.

So, I decided to change the controller, mach 3 interface controller board.

However, lack of the technical data(mach 3 board connection example) making my conversion procedure stop.

So, Please.......

Help me.

P.S. I e-mailed SIEMENS about the pin data of motors and searched mach 3 board connection of AC servo motors.