586,036 active members*
3,813 visitors online*
Register for free
Login

Thread: error

Results 1 to 4 of 4
  1. 03-13-2019, 09:45 PM #1
    jarl85
    jarl85 is offline Registered
    Join Date
    Feb 2014
    Posts
    33

    error

    can someone assist me with this error


    Attachment 415346



    thanks Karl
    Reply With Quote Reply With Quote
  2. 03-14-2019, 03:30 AM #2
    maver1ck
    maver1ck is offline Registered
    Join Date
    Mar 2011
    Posts
    463
    Means the axis was out of position, either moved further than expected (i.e. runaway axis) or didn't move as far as expected (i.e. motor power cable is disconnected).

    These are the two extremes, yours is likely somewhere in the middle but without detailed information, can't be specific. There are many potential causes for either.
    Reply With Quote Reply With Quote
  3. 03-14-2019, 03:50 PM #3
    meckardt55
    meckardt55 is offline Registered
    Join Date
    Dec 2006
    Posts
    584

    Re: error

    With the machine off you need to remove the left hand X axis way cover and look at the motor electrical connections and turn the ballscrew to make sure it turns easy
    It help if you gave us more info on the problem along with the type of machine and drives. Do you have scales??

    MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
    Reply With Quote Reply With Quote
  4. 03-24-2019, 12:55 AM #4
    jarl85
    jarl85 is offline Registered
    Join Date
    Feb 2014
    Posts
    33

    Re: error

    thanks for the help

    one of the bearings went bad and í change it, and all is good now

    Karl
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Has anyone ran into this error? Parasolid ® Kernel Interface Error: KI Error Code:58
    By bassix187 in forum Mastercam
    Replies: 8
    Last Post: 02-06-2015, 03:56 PM
  2. Fixed BMDC Error, now have overactive feed error. Help needed.
    By victorgallas in forum Bridgeport / Romi Lathes
    Replies: 3
    Last Post: 11-01-2014, 11:22 PM
  3. Strange error in machine defintion manager (Error occoured in IOF chook: )
    By CNDaniel in forum Mastercam
    Replies: 0
    Last Post: 07-17-2014, 04:12 PM
  4. Cincinnati Sabre 750 850SX spindle error 16541 Fanuc error AL 12
    By markp in forum Cincinnati CNC
    Replies: 0
    Last Post: 05-05-2013, 05:40 AM
  5. Yaskawa Servopack error: A.D1. Motor Load Position Excess Error
    By Syphonics in forum Servo Motors / Drives
    Replies: 0
    Last Post: 04-26-2012, 07:53 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules