[SolubleSpork]

Personal project - I need one of each of these panels made in aluminum or stainless ~2 mm thick (~.078"). Parts are 7.5" x 5" and 6" x 3". Previews below, the tolerances are not that critical, really anything more than just hand cutting will do. Small inside corner rads are fine, I can file to fit. I do have CAD files and can convert to whatever is needed. Smallest hole size is ~.125" in either case.

[peteeng]

There will be a laser cutter nearby you that can do this easily - Peter

[SolubleSpork]

Yeah, I have tried a few places and they either won't do personal projects (I've been told for tax reasons they can't work for individuals - not sure I believe that but whatever) or they don't bother with one offs usually because the cost for it will be too high. And I have gotten some quotes that are way too high for what I need in these parts. Figured I would check on here if anyone wanted a go.

[cooperjm]

Send the dxf to [email protected]


Sent from my SM-G955U using Tapatalk

[CROSSHATCH]

Can't private message through my phone (oh well).

Can you e-mail at [email protected]

I'll provide a quote via e-mail, along with any other comments or questions.

Regards,

Jason

[jtshop]

i sent you private message...pls let me know. Thanks