OK, finally got my little cnc lathe in-place up and running. But I'm having trouble getting my head around it doesn't have a machine home position, what is the right way to set a home X0Z0?
OK, finally got my little cnc lathe in-place up and running. But I'm having trouble getting my head around it doesn't have a machine home position, what is the right way to set a home X0Z0?
What control?
Sent from my MHA-L29 using Tapatalk
It's a Washing W-31DT if that helps.
You could set each tool Z zero to the chuck face, and each tool X zero to the spindle centerline. Then all you need to know is how far the work is sticking out from the chuck.
Jim Dawson
Sandy, Oregon, USA
Any Photos of Control ...etc?
If its so old you may need to do G50 X.... Z..... From part zero.
Sent from my MHA-L29 using Tapatalk
Attachment 416672
Attachment 416674
ChrisW I don't have G50
Jim I will try that and see how it goes.
Any previous or sample programs
Sent from my MHA-L29 using Tapatalk
User manuals?
Sent from my MHA-L29 using Tapatalk
Yes there are a couple of test programs in the memory of the controller. Well the "user manual" I got has very little in it and I think it's written in "Chinglish" no help at all
Take screen shoots and post here
Try better resolution cant zoom on the picture you posted
Sent from my MHA-L29 using Tapatalk
ChrisW, will get a better picture today and put it up, got stuck with work yesterday.
Sorry it has taken me a bit to load the photo been stuck with work.
Attachment 417372
Attachment 417374Attachment 417376
The last line of the program is missing the M30 the other 2 programs on the machine do have it on the last line.