Originally Posted by
HalfRapid
Hey guys,
Looked around best I could and in the manuals, but what is the distance between the removable forklift panels on the front of the machine to slide the forks through?? Reason I ask is that we may use a front end loader and his forks can only locate I believe in one spot.
Anyways, was hoping someone had a minute and could run a tape on center of each panel to let me know. The logistics of a move is quite the headache. Will make a nice thread later with pics of how I chose to do it with finer details. I already have the steel square tubing to slide through the casting fyi.
BTW- 96 Fadal with Extended Z FTW
PS- I am a long time lurker and member of other boards, so not necessarily a newbie. Plan to stick around..
Thanks!