Hey All
Just wondering is it possible to create a screw thread in 3d in autocad 2000
thats is,short and sweet
Thanks
Niall
Hey All
Just wondering is it possible to create a screw thread in 3d in autocad 2000
thats is,short and sweet
Thanks
Niall
I don't think there is anything in Autocad. The only way I think you could do it is by creating a spiral and sweeping the thread form through the path.
There are some lisp programs for generating a spiral.
Bill
Check out this link
I've seen wierd things happen when extruding along a spiral path. The objects seem to rotate around the past as they are extruded. But, For ACME screws, I've used multiple spirals (1 for each corner of the trapezoid thread shape and crteate meshes from the spirals. If I make a 1 inch section, I can just use array to make it any length I want.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)