[magzi]

Hi there,

This machine used to be sold in Europe and especially in Sweden.
I'm wondering if anyone else who has the same machine, knows if the operatting system runs from the CF card installed on the Advantech's PCA-6773 card inside the controller?
That is because I have one with no CF card attached and I am looking for a copy in order to try starting it.

Thanks for your help
Michael

[Mr-MaW]

Is this CNC system from Taiwan, China?
He upgrades very quickly, and he needs a lot of specific information.

[cncmakers001]

Hi there,

This machine used to be sold in Europe and especially in Sweden.
I'm wondering if anyone else who has the same machine, knows if the operatting system runs from the CF card installed on the Advantech's PCA-6773 card inside the controller?
That is because I have one with no CF card attached and I am looking for a copy in order to try starting it.

Thanks for your help
Michael

The operating system runs from the inside memory of the CNC controller.
Not from the CF card.

[magzi]

Do you know which is the memory chip?

[magzi]

Finally I found out that the PCA6773 itself is the problem.
It beeps when booting but no VGA output.
Any thoughts?