Help on VFD Settings,
I Have the PRT-E1500W 110V VFD USB CNCEST-6040T

I have contacted the supplier and get no response if my setting are correct for this CNC.
Can some one with the same Machine or knowledge of the setting can tell me if this is correct!

I made some changes to the 199 d-codes and now it runs with pc and manual, were before the spindle would not, Manual or Mach3 PC.

I got this list from the net but the post was for a 220V spindle and mine is 110V.

I also could not change d072 => 1000 it is at 0000 now! is this a problem?
I also noticed that d021 => 50 and other posts say 400 is this a problem?

Can some one check there d-codes and compare. I really don’t want to take a chance that the codes are wrong before I start using this CNC.

Thanks for any input.