[mactec54]

I have done all of these things already and still nothing has changed, I'm sorry to keep asking more and more questions but could there be anything else that I could fix, I also changed the tool numbers not sure if that will affect it or not.

first tool change

%
(knuck bottle opener test)
(T1 D=0.125 CR=0.0625 - ZMIN=-0.015 - ball end mill)
(T2 D=0.1875 CR=0 - ZMIN=-0.35 - flat end mill)
(T3 D=0.25 CR=0.125 - ZMIN=-0.0491 - ball end mill)
N0 G90
N1 G17
N3 G0 Z0
N4 T2 M6
N6 S5000 M3
N7 G54
N9 G0 X0.1255 Y0.7255
N10 G43 Z0.6 H4 ( T2=H2 )

second tool change

N24193 Z0.08 F40
N24194 G0 Z0.6
N24196 M5
N24197 G53 Z0 ( G0Z0 )
N24198 M1
N24199 T3 M6 ( T3M6 must match G43 line H3 )
N24201 S5000 M3
N24202 G54
N24204 G0 X1.9061 Y0.3243
N24205 G43 Z0.6 H5 ( H5 is incorrect has to be the same as the Tool number T3=H3 )
N24206 Z0.2

third tool change

N24475 Z0.2
N24476 G0 Z0.6
N24478 M5
N24479 G53 Z0 ( G0Z0 )
N24480 M1
N24481 T1 M6
N24483 S5000 M3
N24484 G54
N24486 G0 X0.4355 Y1.5
N24487 G43 Z0.6 H2 ( Tool T1=H1 )
N24488 Z0.2
N24489 G1 Z0.065 F40

No you have not you don't want G53 in your program anywhere, not configured like this any way


You have to change all your H numbers to the same as the tool number