501,894 active members
7,995 visitors online
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Sep 2009
    Posts
    19

    Feeds and Speeds 6061

    Hello Forum

    Due to obtaining conflicting information from online calculators, I approach the forum requesting feeds and speeds for profile cutting 6061 Al using a; 0.375" 4 flute rougher end mill going to a depth of
    -1.5" using a HSM milling operation. What say the forum? Thank you!

  2. #2
    Registered
    Join Date
    Feb 2011
    Posts
    244

    Re: Feeds and Speeds 6061

    you will need to give more information
    make and model of the machine
    control make and model
    maximum spindle speed of the machine
    does the machine have high speed machining ?
    how much look ahead does the control have
    what are the feed rates that the machine can obtain
    what kind of tool holder are you using --end mill,er collet style,ect.

  3. #3
    Registered
    Join Date
    Aug 2015
    Posts
    89

    Re: Feeds and Speeds 6061

    If you can find a 2 or 3 flute endmill it would work better.

    I would break the depth of cut in half and do .75 at a time with HSM. 1.5" might be too much for one go at it. I usually do a 30 - 40% stepover.

    If you have good coolant to evacuate the chips I would max out the RPM and do a feedrate of about .004 to .005" per flute. If I'm using a 3 flute at 7500 RPM I usually program the feedrate around 100. ipm.

Similar Threads

  1. Feeds and Speeds question - .125 and 6061
    By adam_m in forum DIY CNC Router Table Machines
    Replies: 14
    Last Post: 12-22-2016, 10:13 PM
  2. Speeds and Feeds for 1/8" endmill in 6061 Aluminum
    By braddo in forum Uncategorised MetalWorking Machines
    Replies: 9
    Last Post: 02-15-2014, 02:46 AM
  3. Countersink Speeds and Feeds, 6061, 6-flute carbide
    By sanddrag in forum Uncategorised MetalWorking Machines
    Replies: 10
    Last Post: 01-14-2013, 04:45 AM
  4. Feeds and Speeds help
    By gmessler in forum General Material Machining Solutions
    Replies: 4
    Last Post: 02-01-2011, 08:31 PM
  5. Milling some 6061, want to move lots of metal, what feeds and speeds?
    By Loading in forum Uncategorised MetalWorking Machines
    Replies: 9
    Last Post: 06-27-2006, 07:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •