502,953 active members
6,623 visitors online
Register for free

Thread: sprue puller

Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2012

    sprue puller

    I finally have my Boy 15S injection molding machine up and running and I found a MUD frame on Ebay and ordered a set of aluminum mold plates. I was about to order some injection pins to make my first mold and realized that I will need to have a sprue puller in the mold and a sprue ejection pin.

    Looking online I found these sprue lock bushings, but it seems that there are not many different types of premade bushings available.https://us.misumi-ec.com/vona2/detai...079910/?Inch=0

    My question is do most people buy the sprue puller bushings like this already made or do they just machine a sprue puller into their mold cavities?

    If people are machining them into the cavity can someone share with me a design for one with a cold slug well that is good for both ABS and polycarbonate? Also, is there a recommended reverse taper cutter that can be recommended for machining the sprue puller cavity. Obviously, this needs to be done at the correct depth and angle to work well. I am not sure where to buy this odd cutter.

    Also, what diameter sprue ejection pin would you normally use on small molds and how much larger should I ream the hole for it? It would be great if someone could recommend a specific part number of pin to use.

    Thanks in advance for any advice you can give me on this.

  2. #2
    Junior Member
    Join Date
    Dec 2018
    In the cold slug area of the spruce puller pin, just use a ball shape burr bit to create an under cut.

  3. #3
    Join Date
    Aug 2007

    Re: sprue puller

    look at danly/DMS uk. meusburger or hasco for standard parts

Similar Threads

  1. Bar Puller
    By BCARL in forum Cincinnati CNC
    Replies: 4
    Last Post: 02-27-2017, 11:06 AM
  2. How to use a sprue reamer.
    By Hyrum in forum Moldmaking
    Replies: 3
    Last Post: 07-09-2012, 06:01 AM
  3. Which bar puller do you use.
    By 123tool in forum Haas Lathes
    Replies: 13
    Last Post: 02-16-2010, 11:40 PM
  4. G code with a bar puller
    By Vern Smith in forum Haas Lathes
    Replies: 3
    Last Post: 10-13-2009, 02:34 PM
  5. Mold bases - sprue/runner/gate system
    By Wargamer in forum Moldmaking
    Replies: 6
    Last Post: 07-17-2007, 05:05 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts