How can I get alphacam to stop doing this? I designed this is alphacam for mothers day, and I keep getting these circles on the letters. These circles scale porportionally with the bit size too. currently a 1/8th inch bit.
How can I get alphacam to stop doing this? I designed this is alphacam for mothers day, and I keep getting these circles on the letters. These circles scale porportionally with the bit size too. currently a 1/8th inch bit.
Here is the picture of what is happening.
depends of the text-font I assume?
It does this on all fonts except the stencil font.
How are You machining this? Pocketing or Rough/Finish?
Are you using G41/G42? If so, try without it.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I am Pocketing and Rough/Finish
- - - Updated - - -
I will try that today, I will see if it works. Thank you.
Here is my settings, it is still making the little circles that branch off the text.
I would like to see Your AlphaCAM drawving - with toolpaths.. maybe I/we can't se the problem, and it can be right under our noses :-(
Here is what i've got, the simulation is fine, so I do not know whats wrong.
Yes - but with only a screenshot we can see nothing.. You have to save Your file, and upload it - otherwise its' just guessing
Oops, I misunderstood. It won't let me upload the .ard and .anc files
Try to upload a zip of the ard
Pocketing