Re: OKUMA LATHE LB-3000 SPINDLE REPAIR
hy shooter what happened ? what caused the failure ?
... parts for spindle : 7000
... shipping : 500 - 1000
... workmanship : 1500 - 3000
if you are lucky, the bearing inside the hydraulic cilinder are ok, but how it is being spinned by the spindle ( as long as minimal hidraulic pressure exists ), then any motion problem inside the spindle is copied inside the hydraulic cilinder; so, if there where motion shocks, discontinuous rotation, etc, consider also this :
...hydraulic cilinder : 4000
* all these numbers are informative, may be different values in your area
hmmm
aaa, there is a method to lower costs, like finding a service guy which is no longer working at the service provider; for example, if you have conections, maybe you can find such a guy : retired, or no longer working at the service dealer; i know such persons, but not in your area
do you proper maintain the machine ? is there spindle oil replacement done regulary, is the oil level checked at least once / week ?
sh**t happens
i can help with tips about lowering cnc reaction time, lower servo torque limit, 100% process monitoring, and others, that are not 'default'; prevention is the key, and osp has stuff inside it, that allows configuring the machine in ways not possible on other brands / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg