I have a Teco 7200MA VFD 240v 50/60hz. HP: 3 KVA: 4. output 3ph 240v 9.6amp
the original spindle motor has died, I have decided to replace it with a water cooled spindle.
I have bought a Jianken JDG 80/2.2kw 220v 400hz 6A water cooled spindle
these are the VFD parameters sent with it
power: 2.2kw
max speed: 24000rpm
upper limit of the frequency: 400HZ
rated frequency: 400HZ
time of speed up / down: 20~30s

need help with the setup parameters any help would be greatly appreciated.

I have the user manual for the VFD but find it very confusing I would like to get it right first time rather than damage the spindle or VFD