Re: Okuma lb 15 osp 5000L-G Paramter Floppy disk information
You should have a data management card in the back of your machine that lists the machine coordinate data for your machine. Once that is entered I can provide you with the Long Word, Word, and BIT defaults.
Your 8” floppy is in Okuma format and is encrypted so you will not be able to extract the info.
Also check to see if you have the DATA PIP function on your machine. If you do then you may be able to transmit the data into or out of your machine by RS 232.
Experience is what you get just after you needed it.