Hello,

Can anyone who owns a SIKO MA523/1 3-axis DRO, or the re-branded Optimum DRO5, help me with the magnetic linear encoder sensor pin-out.

The sensors are actually SIKO MS100/1 and they connect via mini-DIN 6 pole connectors. On the SIKO webpage there is no information regarding the connector pin-out.

The machine I own is DRO-ready (prepared for SIKO sensors). I want to use them + a china DRO display and for this I need the sensor pin-out.

Can you please post the pin-out. At least the sensor supply and sensor ground pins would be very helpful. For the rest of the signals I could use an oscilloscope to identify them.


Thank you