so, now you are able to execute g01 ? but are you also spinning the spindle ?I just add M130 to the program to start making chips
so, now you are able to execute g01 ? but are you also spinning the spindle ?I just add M130 to the program to start making chips
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
Yeah, we are running G01 with M130 and the spindle as usual. M131 is active even with the spindle running.
It seems that the needing to command M130 is a damaged interlock in the ATC door, but I'm not sure about this. What's real is that interlock was causing an overspeed alarm that limits the running of spindle up to 800rpm and a
magnetic encoder alarm 1170 MCS .
Enviado desde mi SM-J700M mediante Tapatalk