Re: Extrude cut onto two different surfaces (ver2012)
Originally Posted by
Mooser
I'm looking to cut a pocket into the side of a part. The side is actually two surfaces at an angle to each other with a fillet rad between them.
When extrude cutting I can use the offset from surface option but only from one of the surfaces. Searching I've found various methods but they all seem to only work when it's one continuous surface (like the side of a cylinder or cone)
I can cut the part in mastercam by projecting a toolpath onto the surfaces but I should be able to do it on the model but can't seem to find the correct answer
Here's a couple of screen caps of what it's trying to do and one from what I got mastercam to actually cut, the part is done but I'd like to learn how to do this to the model
Thanks
M
Merge all the surfaces you want to offset from prior to the extruded cut operation.
Sent from my SM-T820 using Tapatalk
--Colin--
www.bdmodeling.com